Gillison's Variety Fabrication GVF 5000, Руководство пользователя

Страница: 7 / 60

Gillison Forklift Manual
SAFETY - 5
FIG. 9: Do not use starting fl uid. Starting fl uid must
only be used when an ether-start aid is fi tted as original
equipment by the manufacturer or when installed by a
dealer as an approved accessory.
The forklift is equipped with an intake heater. This
must be removed prior to the use of starting fl uid or
ether aid.
Use of starting fl uid on an engine equipped with an in-
take heater can result in severe engine damage.
Make sure there is plenty of ventilation. Never oper-
ate the engine in a closed building.
Always start and operate engine in a well-ventilated
area.
If in an enclosed area, vent the exhaust to the outside.
Do not tamper with or modify the exhaust system with
unapproved extensions.
SAFETY WHILE SERVICING THE MACHINE
Stop the machine. DO NOT service the machine
while the engine is running or hot, or if the machine
is in motion.
NOTE: When making major repairs or
complicated adjustments, it is recommend-
ed that you consult your Gillison Dealer
and have the work carried out by trained
personnel.
The following precautions should be observed. These
have been arranged by machine area or component.
Cooling System
FIG. 10: DO NOT remove the radiator cap (see 1)
when the engine is running or hot.
DO NOT add coolant to the radiator while the engine
is running.
Before removing the radiator cap, turn the cap slowly to
relieve the pressure.
When adding coolant, make sure coolant being added is
compatible and will mix with existing coolant.
FIG. 9
FIG. 10
ETHER
PREVIOUS
PAGE
NEXT PAGE LAST PAGE FIRST PAGE