Gillison's Variety Fabrication GVF 5000, Руководство пользователя

Страница: 11 / 60

Gillison Forklift Manual
SAFETY - 9
SERIAL NUMBER
Location of serial number is on the nameplate and is
provided as a reference.
See FIG. 16
SAFETY WHILE OPERATING
FIG.17 Review ENTIRE operator’s
manual before operating this machine.
Fasten seat belt securely before starting.
Keep both hands on controls at all times
when operating this vehicle.
Carry load low.
Use low range for hillside or ramp op-
eration.
Block elevated components before ser-
vicing equipment.
Do not leave machine with mast raised.
Do not allow riders.
Do not leave machine with engine run-
ning.
Heed these safety rules:
Inspect the forklift each day.
Perform scheduled maintenance to ensure optimum
performance.
Wear proper clothing.
a. No baggy clothing
FIG. 17
b. Use eye protection
c. Use hard hat
Fasten seat belt securely before starting the forklift.
When mounting and dismounting the forklift, use the
steps and hand holds provided. Do not use steering
wheel or controls.
Keep body, feet and hands inside the operators’ plat-
form when the forklift is running.
Do not operate the forklift under the infl uence of any
kind of drugs or alcohol that impair judgment or per-
formance.
Do not operate the forklift without overhead guard in place.
Lower forks completely to the ground when adjusting
and when work is completed.
Do not allow anyone to stand under or work under
raised forks.
Never raise persons with the forks.
Never leave forklift running unattended. Always set the
parking brake, shift to Neutral, shut off engine and re-
move the key.
LOAD HANDLING SAFETY
Heed these safety rules:
When lifting or loading, tilt the mast back.
Use caution when tilting mast forward to ensure load
does not shift off forks.
Never carry maximum rated load with center of load 24
inches above forks.
Avoid sudden starts and stops to prevent load from
shifting.
Lift loads on level ground to prevent rollover.
Always watch for overhead obstructions when operat-
ing and lifting loads.
Do not exceed the lifting capacity of the forklift.
Always ensure forks of the proper capacity are used.
Never interchange forks with forks of a different rat-
ing.
Do not add or subtract weight from the counterweight
box.
PREVIOUS
PAGE
NEXT PAGE LAST PAGE FIRST PAGE