above the finished floor for safety.
Check all items against Parts List on Page1 to ensure all have been included.
1.
Carefully postion four Support Brackets to three Bar Sections. Note that Bar Sections are engaged evenly in each
2.
of the Support Brackets. The ends of each Bar Section will be centered in the connector on the Support Brackets.
Finished length of Chinning Bar is 10' - 0".
3. Secure Support Brackets to Bar Section with M6 - 1.0 x 1cm long Set Screws - two Set Screws at each
support bracket. Tighten securely.
4. Mount Chinning Bar to wall using hardware provided - M12 x 60 mm Hex Head Lag Screw, M12 Flatwasher,
and Wall Anchor - two at each Support Bracket. NOTE - Chinning Bar MUST be installed at a minumum height
00196-013 Wall Mounted Chinning Bar
Page 3 of 3
Wall Mounted Chinning Bar
INST00196013
2/23/2017
800-637-3090
www.gillathletics.com
All rights reserved.
Copyright
H
2017 by Gill Athletics.
Instructions
40"
40"
40"
120"
4
1
1' - 4"
3
15"
12 - 3/4"
6' - 8"
Minimum To Floor
WARNING
: This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
E