1' - 4"
above the finished floor for safety.
Check all items against Parts List on Page1 to ensure all have been included.
1.
Carefully postion four support brackets to bar section. Note that support brackets are spaced evenly along
2.
bar section on center. The ends of the bar section will be flush with outside edges of Support Brackets.
Finished length of Chinning Bar is 10' - 0".
3. Secure Support Brackets to Bar Section with M6 - 1.0 x 1cm long Set Screws - two Set Screws at each
support bracket. Tighten securely.
4. Mount Chinning Bar to wall using hardware provided - M12 x 60 mm Hex Head Lag Screw, M12 Flatwasher,
and Wall Anchor - two at each Support Bracket. NOTE - Chinning Bar MUST be installed at a minumum height
00196-010 Wall Mounted Chinning Bar
Page 2 of 3
Wall Mounted Chinning Bar
INST00196013
2/23/2017
800-637-3090
www.gillathletics.com
All rights reserved.
Copyright
H
2017 by Gill Athletics.
Instructions
1
8
39
"
"
1
"
39 8
39
1
8
120"
4
1
2
15"
Minimum To Floor
6' - 8"
12 - 3/4"