EN
EN
Instructions
4.SAFETY SEAT USE METHOD
4.1 Install Location
When using as Universal category(Group 123), this child restraint system is
suitable for seatbelt models equipped with a three-point retractor that complies
with ECE R16 and does not apply to models only equipped with 2-point seat
belts.
4.1.2
When using as ISOFIX child restraint system (group1), this child restraint
system is suitable for vehicles equipped with the ECE R14 requirements. And
only after installation ISOFIX, then can use on it.
4.1.3
When using as Semi-Universal category(Group 1,2,3), this child restraint
system is suitable for seat belt models equipped with the three-point retractor
that has passed the ECE R16 requirement and in not suitable for models only
equipped with 2-point seat belts. And only after installed ISOFIX, they can use
on it.
4.2 How to use the harness buckle
Hold the two buckle latches together. Make
sure the right side is up. Engage them before
pu ng them into the harness buckle, which
should make a CLICK noise.
Pull shoulder straps to remove all slack from
the lap sec on ensuring that the harness is
lying flat and the harness buckle is locked.
Open the harness buckle by pressing the red
bu on.
