EN
INSTRUCTIONS FOR USE
Press to open/close/return to main menu
Press
-
or
+
to navigate through func ons.
Press
OK
bu on to enter the submenu or confirm the func on.
Setup steps
Press and hold on the monitor to talk to the camera.
Release the bu on to hear the sound from the camera (default state).
Intercom
Press then press
OK
bu on to enter this op on.
Press
OK
bu on again to confirm, the LED indicator will start flashing.
Press and hold the pair bu on behind the camera for 3 seconds
Pairing
Installa on
Wireless Monitor
1. Place the monitor in a place that will have clear recep on with your camera(s)
2. Adjust the stand
Wireless Camera
Before you install the camera, carefully plan where and how it will be posi oned,
and where you will route the cable that connects the camera to the power adapter.
Before star ng permanent installa on, verify its performance by observing the
image on the monitor when camera is posi oned in the loca on/posi on where it
will be permanently installed and the monitor is placed in the loca on where it will
be used most of the me.
1.Carefully unpack the camera
2. Mount the camera to the wall
3. Adjust the viewing angle of the camera
Installa on ps
Aim the camera(s) to best op mize the viewing area: Select a loca on for the
camera that provides a clear view of the area you want to monitor, which is free
from dust, and is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstruc ons between
the camera and the monitor.
5
