manualshive.com logo in svg

GILES RT-5, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
GILES RT-5 Скачать руководство пользователя страница 8

vi

Model:  RT-5

Safety

Specific Safety Precautions

For your safety, please observe the following precautions when operating or servicing the Giles Rotisserie
Model RT-5.  Read the following important safety information to avoid personal injury and/or damage to
the equipment.

•

Always disconnect the source of the main power before removing any service covers.

•

Failure to comply with these 

DANGER

notices will result in death or serious injury, equipment/property

damage, and void the warranty.

!

DANGER

•

DO NOT

use or store gasoline or other flammable liquids or vapors in the vicinity of this or any other

appliance!

•

Consult a qualified electrician to ensure all electrical specifications have been met and the unit is prop-
erly grounded.

•

Before installing or servicing this equipment, read the contents of this manual thoroughly.

•

Improper installation, adjustment, alteration, service or maintenance could result in death or serious
injury, equipment/property damage, and void the warranty.

•

Exercise care when lifting or moving the unit. For unit weights see Section 1-03.3.

•

Exercise care when removing the wooden crate from around the unit.

•

DO NOT CLEAN OR TOUCH

the quartz lights located in top of the RT-5 doors.

•

DO NOT CLEAN GLASS WHEN HOT!

Clean glass with approved cleaner, do not use abrasive on

glass!

•

Failure to comply with these 

WARNING

notices could result in death or serious injury and

equipment/property damage.

!

WARNING

Содержание RT-5



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды