Gilera Nexus 250 i.e. Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 96

Gilera Nexus 250 i.e. Скачать руководство пользователя страница 41

02_11

Stand (02_10, 02_11)

SIDE

Push with your foot on the stand's prong

«L»

until it releases into position, while low-

ering the vehicle onto the stand.

WARNING

THE SIDE STAND CAUSES THE ENGINE TO TURN ITSELF OFF WHENEVER IT
IS LOWERED.

02_12

Automatictransmission (02_12)

To ensure simple, pleasurable riding, the vehicle is equipped with automatic trans-
mission with regulator and centrifugal clutch. The system is designed to provide the
best performance (acceleration and consumption) while driving on both flat roads and
uphill.

If you have to stop up a hill (traffic lights, traffic jam, etc.)

use only the brake to keep

the vehicle still, leaving the engine running at idle speed. Using the engine to
keep the vehicle still can cause the clutch to overheat, due to the friction of the
clutch mechanism itself against the capstan.

It is therefore recommended to avoid conditions of prolonged clutch slippage (other
than those previously indicated) like driving uphill fully laden on steep slopes or starting
off with driver and passenger at slopes greater than 25%.

Take the following precautions if the clutch overheats:

1.

Do not continue riding in such conditions.

2.

Let the clutch cool down with the engine at idle speed for a few minutes.

41

2 Use

«
...
39
40
41
42
43
...
»

Содержание Nexus 250 i.e.

































































































Отзывы:

Нет отзывов