Start-up and Configuration
Page 3-8 MDE-4771H Encore® S Enhanced FlexPay™ EMV® CRIND® Start-up/Service Manual · November 2019
Configuring FlexPay EMV CRIND to Support Esso™
Speedpass™ Tags (Gilbarco TRIND Option)
Configuring FlexPay EMV CRIND to Support Esso
™
Speedpass
™
Tags (Gilbarco TRIND Option)
TRIND/Speedpass Installation Requirements
FlexPay EMV CRIND Basic Input/Output System (BIOS) V20.0.30 or higher and G-SITE
®
V59.0.34 are required for operation in the Esso Speedpass
environment.
The FlexPay EMV CRIND BIOS installed on either side must be V20.0.30 or higher. The
FlexPay EMV CRIND on each side must be connected and configured independently.
Ensure that the unit has TRIND hardware and readers installed as shown in
Figure 3-14: TRIND Setup
