Gilbarco Advantage K35496, Руководство по введению

Страница: 10 / 10

Installing the Assembled Canopy (The Advantage Series and Encore Units)
© 2012 Gilbarco Inc.
7300 West Friendly Avenue · Post Office Box 22087
Greensboro, North Carolina 27420
Phone (336) 547-5000 ·
http://www.gilbarco.com · Printed in the U.S.A.
MDE-2636D Canopy Kits (K35496 and K35498) for The Advantage® Series and Canopy Kit (K96632-02) for
Encore® · September 2012
The Advantage
®
Series, Encore
®
, and Legacy
®
are registered trademarks of Gilbarco Inc.
Installing the Assembled Canopy (The Advantage Series
and Encore Units)
The assembled Canopy is shown in Figure 5 .
Figure 5: Installing the Assembled Canopy
Canopy Bracket
Mounting Holes
To install the assembled Canopy, proceed as follows:
1 Remove the four Lifting Brackets and Bolts from top of the Upper Housing. Retain the Bolts
for reassembly.
Note: Lifting Brackets will not be reinstalled. However, they may be required in future if the
unit has to be moved. It is recommended to join them with a wire or a tie wrap and store
carefully in the Hydraulics or Main (Electronics) Cabinet.
2 Lift the Canopy onto the Upper Housing, aligning the Canopy Bracket Mounting Holes and
mounting holes for the Lifting Brackets.
3
Secure the Canopy to the Upper Housing using the four Bolts retained.
Installing the assembled Canopy on the The Advantage Series and Encore Units is now
complete.