USER MANUAL
USER MANUAL
1-INTRODUCTION
The Solar Pad with Rechargeable Lighting System combines the use of solar energy with
highly efficient LED technology. It is designed for convenient, versatile and simple
operation. The system features a weather resistant solar pad which plugs into the
battery port, charging the built-in LED flashlight. The flashlight panel also features four
convenient 6v DC connection ports and 1 USB port. Simply connect the included LED
light bulbs to the connection ports for extra lighting. The USB port can charge most
small electronics and includes a multi USB cable charger. As an extra feature, the
flashlight offers multi-level lighting options: 25%, 50%, 75% and 100% brightness. The
panel also features a charging status indicator light. Use this product anywhere, from
home, camping, garage, motor vehicle or anywhere portable lighting is needed.
2-ATTENTION
A- Please read the instructions before use.
B- To conserve battery charge and performance, turn off the power when not in use.
C- To preserve the life of the battery, the product should be charged 10 consecutive
hours once every 3 months.
D- Only use a 7.5V DC adapter (not included) when charging this product.
E- Do not use any other solar panel to charge the battery.
F- Do not open the solar pad.
G- Do not open the sealed lead-acid battery.
H- Keep away from water & flammable material.
I- Keep between 32ºF - 104ºF.
3-INSTRUCTION
A- For first time use, the battery must be fully charged. Position the solar pad to receive
8 hours of direct, unobstructed sunlight (time may vary pending light conditions). Be
sure to connect the solar pad cable into the charging port on the flashlight panel.
Note: flashing red light indicator represents battery charging. Green light indicator
represents fully charged battery.
B- When battery is fully charged, disconnect the solar pad cable from the flashlight
panel. Flashlight, LED lightbulbs and USB charging port are ready to use.
C- The flashlight has 4 levels for brightness 25%, 50%, 75% and 100%. Toggle to each
brightness level by pressing the “ON/OFF” button on the flashlight panel.
D- To use the 3 LED light bulbs, connect the LED bulb cables to the available DC ports
on the flashlight panel. Note: the light bulb cables are equipped with “on/off” switch.
E- The standard USB cable can be directly connected to the 5V output charger for
charging mobile phones, games consoles, digital cameras, MP4 players and other
small capacity equipment.
ON OFF
BULB 1,2,3,4
OUTPUT 6V
USB
POWER
INDICATOR LIGHT
ON/OFF
6V DC
5V DC
Charging
Working light
1
2
3
4
FLASHLIGHT PANEL
4-TROUBLESHOOTING
A- When the red light flashes, the system needs to be charged with the solar panel
or adapter (not included). During charging, the red light will keep
flashing every 3 seconds. Light turns to green when fully charged.
B- If the red light is not flashing every 3 seconds, nor the green light flashing during
charging, check if your DC cable is connected properly. If using the solar panel,
ensure the cable is connected properly and there is enough sunlight to charge.
5-PARAMETERS
Model: SLT022
Solar panel power: 5W
Solar panel open-circuit voltage: 8.8~10.5 VDC
Solar panel charging current 500~800 mA
AC voltage: 100-240 VAC
USB output Voltage: 5VDC
USB output max current : 0.5A
Charging protection: 7.2V DC full charge represents continuous green light
Low voltage protection: 5.4V DC not full charge represents flashing red light
Battery: 6V/4AH
USB cable: Ten piece connector
LED bulb: 3W/6V* 3pcs
LED lighting: I 0.3W, II 0.7W, III1.3W, 2.0W
*The above parameters are subject to change without notice.
