Gigaset T300 PRO Скачать руководство пользователя страница 62

Страница: 62 / 94

Server

Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010

rsion 2, 06.0

.2010

Configuration – external mail server

SMTP Server

: The address of the SMTP server is available from your e-mail provider or

from your network administrator if you are using a company-owned mail server.

User

: The user name usually is the full e-mail address or the part before the @ symbol.

You can obtain the user name from the respective provider or your network provider.

Type of SMTP dispatch

Most SMTP servers await the sender to "log in" before sending e-mails. This can occur via

SMTP with AUTH

with user name and password or with the, now seldom used

SMTP after

POP3

, whereby it is checked whether there are new messages on the incoming post

server (POP3) first. The log in data used here also applies for the subsequent e-mail dis-
patch. To use this option, set

SMTP with AUTH

, then activate

SMTP after POP3

and

input the address of the POP3 server.

Before saving the configuration, the correctness of the data can be checked by clicking on

Test

, where you can also make any necessary changes.

Web server

As a default,

HTTPS Service

is already activated alongside HTTP for the Gigaset T300 PRO

/ Gigaset T500 PRO web server. Both services are available on the standard port numbers,
which you can freely change.

The

Force redirect to HTTPS

option enables access to the Gigaset T300 PRO / Gigaset

T500 PRO web user interface via HTTPS only.

HTTPS and server certificate

HTTPS (Hypertext Transfer Protocol Secure) is a network protocol for encoding data being
transferred using SSL/TLS and provides:

Data confidentiality, i.e., the data can not be viewed by third parties.

Data integrity, as the data can not be manipulated.

Authenticity through the certainty of being connected only to the requested web
server.

A certificate for the web server is required to use HTTPS. In the Gigaset T300 PRO / Gigaset
T500 PRO, there is only a provisional certificate available.

Click on

New Certificate

to open an entry screen. Two entries are absolutely necessary in

this screen:

The server name indicates the domain for which the certificate should apply.

The number of days for which the certificate should be valid.

Please note

If HTTP is deactivated or the port number is not

, problems with several connec-

tions may arise, e.g., the addressbook for Gigaset SIP phones.

Содержание T300 PRO































































































Результаты поиска

Содержание T300 PRO

Отзывы:

Похожие инструкции для T300 PRO

Бренды по названию

Популярные бренды

Gigaset T300 PRO, Руководство администратора

Результаты поиска

Содержание T300 PRO

Отзывы:

Похожие инструкции для T300 PRO

Бренды по названию

Популярные бренды