37
Accessing additional functions via the PC interface
Gigaset SL610H PRO / GBR / A31008-M2352-R101-2-PG43 / appendix.fm / 24.08.2012
V
e
rsion 4,1, 21
.11.2007
Accessing additional
functions via the PC
interface
To enable your handset to communicate
with the PC, the
"Gigaset QuickSync"
program must be installed on your PC
(free to download at
www.gigaset.com/pro/gigasetSL610HPRO).
Transferring data
After installing "
Gigaset QuickSync
", con-
nect the handset to your computer
(
page 12) using Bluetooth (
or a USB data cable.
Start the "
Gigaset QuickSync
" program. You
can now synchronise your handset directory
with Outlook; download caller pictures
(.bmp) and images (.bmp) as a screensaver
and sounds (ringtones) from the computer
to the handset (and vice versa).
During the transfer of data between handset
and PC, you will see
Data transfer in
progress
on the display. During this time the
keypad is disabled and incoming calls will be
ignored.
Completing a firmware update
¤
Connect your phone to your PC using a
USB data cable
¤
Start the "
Gigaset QuickSync
" program
on your PC.
¤
Establish a connection to your handset.
¤
Select
[Settings]
¢
[Device properties]
to open the
[Device]
tab.
¤
Click on
[Firmware update].
This launches the firmware update.
The update process can take up to 10 min-
utes (not including the download time).
Do
not interrupt the process or remove the
USB data cable.
The data is initially loaded from the update
server on the Internet. The amount of time
this takes is dependent on the speed of your
Internet connection.
The display on your phone is switched off
and the message key
f
and the talk key
c
start flashing.
Once the update is complete, your phone
will automatically restart.
Procedure in the event of an error
If the update procedure fails or your phone
does not work properly following the
update, repeat the update procedure as fol-
lows:
¤
Close the "
Gigaset QuickSync
" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Replace the battery.
¤
Complete the firmware update as
described.
Please note
Operating both connections in parallel
will not allow you to use all features
simultaneously.
