9
First steps
Gigaset SL610H PRO / GBR / A31008-M2352-R101-2-PG43 / starting.fm / 24.08.2012
V
e
rsion 4,1, 21
.11.2007
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery and closing the battery cover
To
reopen the battery cover
to replace the battery:
¤
Remove the belt clip (if
attached).
¤
Insert your fingernail into the
notch at the bottom of the
casing and pull the battery
cover upwards.
To
change the battery
,
insert
your fingernail into the notch in
the casing and pull the battery
upwards.
Please note
Use only rechargeable batteries recommended by Gigaset Communications
GmbH, as this could result in significant health risks and personal injury. For
example, the outer casing of the battery could be destroyed or the battery could
explode. The phone could also malfunction or be damaged as a result of using
batteries that are not of the recommended type.
¤
First insert battery with the con-
tact surface facing down
a
.
¤
Then press the battery down-
wards
b
until it clicks into place.
¤
First, align the protrusions
on the side of the battery
cover with the notches on
the inside of the casing.
¤
Then press the cover until it
clicks into place.
a
b
