76
Using several handsets
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / T-NetBox_SAG-registration.fm / 27.10.08
Ve
rsion 4, 16.09.2005
You have the following options:
Ending a consultation call
§End§
Press the display key.
You are reconnected with the external
participant.
Initiating a conference call
§Conf.§
Press the display key.
You are in a three-way conference call
with the external participant and the inter-
nal participant.
If the internal participant who has been
called ends the call (press end call key
), you will be connected with the
external participant. If you press end call
key
,
the external call will be trans-
ferred to the internal participant.
Accepting/rejecting call waiting during
an internal call
If you receive an
external
call during an
internal
call, you will hear the call waiting
tone (short tone). With Calling Line Identi-
fication, the caller's number will appear in
the display.
Ending an internal call, accepting an
external call
§Accept§
Press the display key.
The internal call is
ended
. You are con-
nected to the external caller.
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off.
You remain connected with the internal
participant. The ringer tone can still be
heard on other registered handsets.
Using a handset as a
room monitor
If the room monitor is activated, a previ-
ously stored destination number is called
as soon as a set noise level is reached in
the room.
You can save an internal or external
number in your handset as the destination
number.
The room monitor call to an external
number stops after around 90 seconds.
The room monitor call to an internal
number (handset) stops after approx. 3
minutes (depending on the base station).
During use as a room monitor, all keys are
barred except for the end call key
. The
speaker of the handset is muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated
without a ringer tone
and are only
shown on the screen. The display and key-
pad are not illuminated and advisory
tones are also turned off.
If you accept an incoming call, the room
monitor is suspended for the duration of
the call, but the function
remains
acti-
vated.
If you deactivate then re-activate the
handset, the room monitor remains acti-
vated.
Warning!
–
You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on, the
handset's operating time is considerably
reduced. If necessary, place the handset in
the charging cradle. This ensures that the
batteries do not run down.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor
is forwarded must not be blocked by an
activated answer machine.