57
Operating the base station answer machine
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / answering_m.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Setting up the answer machine
The answer machine has already been
preset at the factory. Make individual set-
tings using the handset.
Call acceptance/charge saving
function for remote operation
You can set when you want the answer
machine to accept a call.
The options are:
0 sec.
, after
10 sec.
,
18 sec.
or
30 sec.
and the cost-saving setting
Automatic
.
In
Automatic
mode, the following applies
for call acceptance:
u
If there are no new messages, the
answer machine accepts a call after
18 seconds
.
u
If new messages are present, the
answer machine accepts a call after
10 seconds
.
When operating remotely you can tell
after approx. 15 seconds that there are no
new messages (otherwise the answer
machine would already have accepted
your call). There will be no call charges if
you hang up now.
v
¢
¢
Voice Mail
¢
Local AM
¢
Ring Delay
Select
0 sec.
/
10 sec.
/
18 sec.
/
30 sec.
/
Automatic
.
§Save§
Press the display key.
Press
and
hold
(idle status).
Please note:
You can configure your telephone so that
the
first
ringing tone is
suppressed
on all
calls (page 82). The time set for call
acceptance therefore does not indicate
how long the phone rings before the
answer machine accepts the call.
Setting the recording time
You can set the maximum recording time
of a message. You can choose between:
60 Sec
,
120 Sec
,
180 Sec
or
Maximum
.
v
¢
¢
Voice Mail
¢
Local AM
¢
Message Length
Select the recording time.
§Save§
Press the display key.
Setting the recording quality
Set the quality you require for your record-
ings. The options are:
Standard
,
High
,
Excel-
lent
. If the quality is higher, the maximum
recording time is reduced.
v
¢
¢
Voice Mail
¢
Local AM
¢
Record Quality
Select the recording quality.
§Save§
Press the display key.
Please note:
Your announcements are always recorded in
best quality.