119
Configuring the local network
Gigaset SE555 WLAN dsl / en / A31008-M1037-B181-1-7619 / configure_tcpip.fm / 27.06.2006
Sc
hablone 2
004_
08_2
6
Synchronising TCP/IP settings with the Gigaset SE555 WLAN dsl
You have now configured your PC so that it is ready to be connected to the Gigaset
SE555 WLAN dsl. You now have to release the old TCP/IP settings and synchronise them
with the settings of your Gigaset SE555 WLAN dsl.
ì
Click
Start
on the Windows Desktop and then
Programs
, followed by
Accessories
and finally
Command prompt
.
ì
In the
Command prompt
window, enter the
ipconfig /release
command and press the ENTER key.
ì
Then enter the
ipconfig /renew
command and press the ENTER key.
If the default IP address (192.168.2.1) of the Gigaset SE555 WLAN dsl was not
changed, the IP address should now read 192.168.2.x (with x being a number
between 2 and 255). The
Subnet mask
must always be 255.255.255.0 and the
Default gateway
must have the IP address of the Gigaset SE555 WLAN dsl
(192.168.2.1). These values confirm that your Gigaset SE555 WLAN dsl is working.
ì
Enter
exit
and press the Enter key to close the
Command prompt window
.