14
Installing the Gigaset USB Stick 54
Gigaset USB Stick 54 / englisch / A31008-M1024-R701-2-7619 / installation.fm / 03.05.2007
Sc
hablone 200
5_07_
27
Checking the installation
If installation was successful, you can now use the Gigaset WLAN Adapter Monitor. You
can use the Gigaset WLAN Adapter Monitor to configure your Gigaset USB Stick 54 and
establish a connection to other network adapters or an access point.
The Gigaset WLAN Adapter Monitor is represented by an icon in the status area of the
taskbar; this icon shows you if there is a connection to a connection partner and the
quality of the connection.
The following may be displayed in the status area of the taskbar:
Please refer to the section entitled "Notes on secure operation" on page 5.
The Gigaset WLAN Adapter Monitor icon is not displayed.
ì
First try to open it manually, see the section entitled
"Opening the monitor" on page 16.
If this fails, then something went wrong during installation.
ì
Uninstall the software, see the section entitled "Unin-
stalling the software" on page 33.
ì
Then install the software again, see the section entitled
"Running the installation" on page 10.
The Gigaset WLAN Adapter Monitor icon is displayed in the
taskbar with a grey ball above the icon:
The Gigaset WLAN Adapter Monitor is installed; the Gigaset
USB Stick 54 is not, or not yet, correctly inserted.
ì
Check the USB connection.
The Gigaset WLAN Adapter Monitor icon is displayed in the
taskbar with a red cross above the icon:
The Gigaset WLAN Adapter Monitor is installed and active; a
connection to the local network has not yet been
established.
ì
Go to the section entitled "Configuring the Gigaset USB
Stick 54" on page 16.
The icon is displayed in the taskbar with a green ball above
the icon:
The Gigaset WLAN Adapter Monitor is installed and active; a
connection to the local network has been established. The
number of bars displayed in the icon shows the connection
quality.
