background image

2

User manual Athens/China C360,C365 English

Safety precautions

Emergency numbers cannot be dialled if the key lock 

(page 1) is activated!

Not all of the functions described in this user guide are 

available in all countries.

Setting up the telephone for use

Step 1: Connecting the base station

First 

connect the mains unit (220 V) to power 

cord

1

 and 

then

 connect the phone jack to phone 

cord 

2

, as shown above. Place the cords in the cord 

recesses. The two cords must 

be plugged in at all 

times

.

Only use 

the mains unit supplied

.

If you ever purchase another phone cord from 

a store, ensure that the phone conductors are 

correctly connected: 3-4 connection of the tele-

phone conductors.

W

Read the user guide and the safety precautions 

carefully before use. Explain their contents to your 

children, and the potential hazards associated 

with using the telephone.

Only use 

the mains unit supplied

.

Fit only the 

approved rechargeable battery 

pack

! Never use a conventional (non-recharge-

able) battery pack as this could damage your 

health and cause injury. Use the battery pack as 

directed in this user guide (page 3).
The operation of medical appliances may be 

affected. Be aware of the technical conditions 

within the particular environment (e.g. doctor's 

practice).
Do not hold the rear of the handset to your ear 

when it is ringing or when the handsfree func-

tion is activated. This can cause severe, perma-

nent hearing damage.

The handset may cause an unpleasant hum-

ming noise in hearing aids.
Do not install the phone in a bathroom or 

shower room. The handset and base station 

are not splashproof.

Do not use the telephone in environments 

subject to explosion hazard (e.g. auto paint 

shops).

If you give your Gigaset to someone else, 

make sure you also give them the user guide.

All electrical and electronic equipment should 

not be disposed of separately from general 

household waste using the sites designated by 

local authorities.

The appropriate disposal and separate collec-

tion of used equipment serve to prevent poten-

tial harm to the environment and to health. 

They are a precondition for the re-use and recy-

cling of used electrical and electronic equip-

ment.

For further information on disposing of your 

used equipment, please contact your local 

authority, your refuse collection service or the 

dealer you purchased the product from.

$

ƒ

1

2

Base station without answering machine

1

2

Base station with answering machine

Содержание Gigaset C360












Отзывы: