36
First steps
Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-1-7619 / starting.fm / 27.08.10
V
e
rsion 4, 16.0
9
.2005
If handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset INT ...?
¤
Perform steps
for each registered handset.
You are then requested to assign the receive connections to the three answering
machines on the base. "
Assign connections to answering machine ?
" is shown in
the display.
¤
Perform steps
for each answering machine.
Please note:
Each connection may only be assigned to one of the three local
answering machines as a receive connection. If you assign a receive connection to
an answering machine and this connection is already assigned to another answer-
ing machine, the "old" assignment is deleted.
After successfully configuring the settings, you will briefly see the following display:
f.
If the base is to make calls via a differ-
ent connection/phone number:
¤
Press
right
on the control key
v
repeatedly, until the required con-
nection is displayed (in the exam-
ple,
IP1
).
¤
Press the display key
§Save§
to save
the settings.
INT 1
Connection for
outgoing calls
f
IP1
g
Back
Save
Connection Wizard
‰
Connection
assignment
complete.
