34
Functions during a call
Gigaset S44 / englisch / A31008-M368-B103-1-7619 / during.fm / 21.2.05
Diverting an incoming call – CD (Call Deflection)
CD enables an incoming call to be diverted to any phone number while it is ringing,
without having to answer the call.
You can pre-set a diversion destination (page 109), dial a phone number from the direc-
tory or enter a new number.
Transferring calls
Transferring a call to an external number – ECT (Explicit Call Transfer)
Requirements:
◆
The feature must be activated see page 116.
◆
Call transfer is only possible if the exchange or your ISDN PABX also supports ECT.
If not, the external call is ended. The number cannot be called back.
◆
To "hold" when making an enquiry call from an external call,
Ext. enq. call
must be
You are making an external call and would like to transfer it to another external sub-
scriber. Establish an external enquiry call (page 30) and press the End call key
a
(also before answer), to transfer the call.
Transferring a call to another handset
You are making an
external
call and would like to transfer it to another handset.
Establish an internal enquiry call (page 31) and press the End call key
a
(also before
answer), to transfer the call.
v
Open menu.
s
Forward
Select and confirm.
The preset diversion destination is dialled.
OK
i
With some ISDN PABX systems, your two parties are not connected to one
another when you press the End call key during a transfer. In this case you
should activate this function on your ISDN PABX, if possible.