background image

Manufacturer Warranty 

Manufacturer warranty 

On the purchase of your new Gigaset product, we guarantee that this equipment is a genuie 

manufacturer’s product and extend the following warranty:
We guarantee this product against manufacturing defects for

 

1 year from the date of purchase, 

unless  otherwise.
Adaptors and batteries for cordless phones carry 6 months warranty from the date of purchase.
Gigaset Communications authorized Service Centres will replace or repair, if necessary, any 

defective part/parts free of charge by presenting this cert

te of warranty at the Service Centre 

mentioned overleaf.
This Cer

ate of warranty does not apply if the telephone has:

1

Been misused, mishandled, willfull damaged, neglected, damaged by lightning, improperly 

repaired, tested, altered improperly in any way.

2

A defect arising out of any failure to follow instructions either in the manual or product spec-

ation.

3

In case repairs are carried out of by unauthorized personnel or unauthorized source warranty 

will be void.

4

A defect arising from using non-Gigaset approved accessories or ancillary items attached to 

or in connection with the telephone.

5

If this cer

te of warranty is not signed and stamped by the authorised distributor.

6

Any other claim resulting out of or in connection with the device shall be excluded from this 

warranty.

In the event of an after-sales issue/warranty claim please refer back to your point of purchase.
P

*Applicable for Middle East and India

roof of purchase (receipt) has to be submitted.

C

*

ert

ate of warranty 

The warranty is not valid if it is not signed and stamped by the authorized distributor.
Please   in the following details and stamp the card to validate the warranty. 

 

All details must be  led in by the dealer and retained by the customer. 

 

This warranty shall apply to products purchased in the Middle East only.

Customer’s Name: 
Product / Model: 
Dealer’s Name: 
Date of Purchase: Invoice / Cash Memo Details: 

Dealer’s Stamp

34

Содержание A450









































Отзывы: