Gigaset A450, Руководство пользователя

Страница: 27 / 40

Advanced Set
Advanced Set
Reset Unit
You can reset your phone to its default settings with this feature.
1. Press the Menu button to enter menu selection.
2. Press the or buttons to select ADVANCED SET and then press the OK button to
select.
3. Press the or buttons to select RESET and then press the OK button
to select.
4. Press the OK button again to confirm. The unit will make an audible tone to confirm and the
unit is reset to its default settings. Upon reset, all your personal settings call log and redial list
entries will be deleted and the phone will return to its default settings. However, your
phonebook will remain unchanged after reset. Also, if you have an answering machine model,
any recorded messages will remain unchanged, but all other settings will be defaulted.
Set Prefix
This allows you to define a prefix number to be added to the beginning of any pre-dialed
number, and to define a detect string to prevent the prefix number being added unless the
detect string matches the first digits of the pre-dialed number, in which case the prefix number
will replace the detect string digits.
You can enter up to 5 digits for the detect string and up to 10 digits for the auto prefix number.
1. Press the Menu button to enter menu selection.
2. Press the or buttons to select ADVANCED SET and then press the OK
button to select.
3. Press the or buttons to select AUTO PREFIX and then press the OK button to
select.
4. To enter a DETECT DIGIT string press the OK button again.
5. The last stored detect string is displayed (if any).
6. Enter a detect string number (maximum 5 digits) and then press the OK button to confirm.
7. To enter a PREFIX number, press the or buttons to display PREFIX and then press
the OK button. The last stored prefix number is displayed (If any).
8. Enter the prefix number (maximum 10 digits) and then press the OK button to confirm. The
unit will make an audible tone to confirm. If no action is taken on the handset within 15 seconds,
the unregistration procedure will be aborted and the handset returns to idle mode. You must
use a handset to un-register handsets from the base unit.
26