background image

12

Gigaset A18H / CHN / A31008-M2071-Y101-5-7619 / main.fm / 19.10.2011

Setting date and time

f

¢

CLOCK/ALARM

 

¢

|

¢

 DATE & TIME

¢

|

 

¢

~

 (enter date: MM/DD)

¢

|

 

¢

~

 (enter time: HH:MM, 24hrs format) 

¢

|

 

¤

Use 

{

 as backspace.

Setting the alarm clock 

You can set an alarm clock on the handset.

Precondition

: The date and time have already been 

set, see above. 
An alarm will sound for 1 minute at the set time once 
or daily. 

f

¢

CLOCK/ALARM

 

¢

|

¢

ALARM

¢

|

 

¢

p

 (select 

ON ONCE

 or 

ON DAILY

 or 

OFF

¢

|

 

If you select 

ON ONCE

 or 

ON DAILY

~

 (enter time: HH-MM, 24hr format) 

¢

|

 

¤

Use 

{

 as backspace.

If the alarm is activated, the 

¼

 icon appears in the 

display. During the alarm 

--ALARM--

 is flashing on the 

display. 

¤

To cut off the alarm press any key on the keypad.

Setting the alarm melody

You can choose from 3 alarm melodies (default: 

MELODY 1

).

f

¢

CLOCK/ALARM

 

¢

|

¢

ALARM TONE

¢

|

 

¢

p

 (select melody)

The selected melody is played.

¤

To confirm a selected melody

¢

|

 

Changing the PIN

The base station is protected via PIN against unau-
thorised handset registration. You can change the 
preset PIN via menu. 

f

¢

ADVANCED SET

 

¢

|

¢

CHANGE PIN

¢

|

 

¢

~

 (enter current PIN, default: 0000)

¢

|

 

¢

~

 (enter new PIN: 0 to 9 digits) 

¢

|

 

¤

Use 

{

 as backspace.

Restoring to the factory settings

You can reset any individual settings and changes 
that you have made. Phone book and calls list entries 
are deleted. After restoring the base, the handset(s) 
must be reregistered.

Precondition:

 handset and base are in idle mode.

Restoring the base

f

¢

ADVANCED SET

 

¢

|

¢

RESET

¢

|

 

¢

p

 (select 

BASE

¢

|

¢

|

 

Restoring the handset

f

¢

ADVANCED SET

¢

|

¢

RESET

¢

|

 

¢

p

 (select 

HANDSET

¢

|

¢

|

 

Connecting to PABX

Your phone is preset at the factory for operation on 
the main connection. For operation on a PABX, you 
may have to change the following values. Please refer 
to the user guide for your PABX.

¤

To change the handset settings use the menu.

f

 

¢

 

ADVANCED SET

 

Please note

Once the date and time are set, if there 
is a power cut of the mains, you should 
reset date and time.

Please note

¤

If you have forgotten the PIN reset 
the base unit to the factory settings 
to reset the PIN to default setting 
0000, 

¢

 page 12. 

AUTO PREFIX

Set a prefix for dialling 
outside line.

FLASH TIME

Change the flash time.

DIAL MODE

Change the dial mode.

Содержание A18H

















Отзывы: