www.gigamedia.net
GIGAMEDIA
User manual (GGM IPAW215D)
8
5. OPERATION
Use a network cable to connect the port LAN IN of your equipment to a computer or network equip-
ment. Open the software “IP network broadcast system” and make sure that the service has started.
The next step is to open the software “iptool”. The window will open, you will have to press the button
“Inquire” (Figure 1) to display the equipments found by “iptool” (Figure 2).
You will now have to change the IP address of your equipment to match the IP addresses of your
network.
You need to fill every field below “New terminal” (Figure 3). Once all the fields are filled, press the
button “Write” to apply the configuration and check with the button “Ping” to see if it is reachable
(Figure 4). When all your equipments are configured, you can close the software “iptool”.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
