GigaFast Ethernet
Section 6
Device Information and Administration configuration in the
Wireless Access Point Router
When you select 1 to enter the device information, you can see the device
information as follows:
Press Esc to exit.
Select 2 to enter administrator setup.
1. Change administrator password: Press 1 for this setting. The system
will ask you to enter your old password, enter your new password, and
retype your new password to confirm.
2. Upgrade new firmware: Press 2 for this setting.
3. Set Date/Time: Press 3 for this setting. Set the date and time
seperately.
You must use a telnet program with file transfer capability to upgrade your
firmware. Window’s built-in hyperterminal does not provide this feature.