Gigafast EE410-R, Руководство пользователя

Страница: 23 / 43

INTERNET BROADBAND ROUTER CONFIGURATION
First make sure that the network connections are functioning
normally.
This Internet Broadband Router can be configured using
Internet Explorer 4.0 or newer web browser versions.
Login to the Internet Broadband Router
Before you configure this device, note that when the Broadband
Router is configured through an Ethernet connection, make
sure the host PC must be set on the
IP sub network that can
be accessed by the xDSL/Cable modem. For example, when
the default network address of the xDSL/Cable modem Ethernet
interface is 192.168.1.x, then the host PC should be set at
192.168.1.xxx (where xxx is a number between 2 and 254), and
the default subnet mask is 255.255.255.0.
1. Open Internet Explorer 4.0 or above Internet browser.
2. Enter IP address http://192.168.1.1 (the factory-default IP
address setting) to the URL web address location.
3. When the following dialog box appears, remain blank (first
login) or enter the password and press Login to enter the
main configuration window.
Note: If needed to set a password, then refer to the Administrator Setting .
17