Gigafast EE410-R, Руководство пользователя

Страница: 16 / 43

Check the installation
The control LEDs of the Internet Broadband Router are clearly
visible and the status of the network link can be seen instantly:
1. With the power source on, once the device is connected to
the broadband modem, the Power, CPU, LAN and WAN
port link LEDs of the Internet Broadband Router will light up
indicating a normal status.
2. By using a Straight through Cable on the four port
broadband router, the WAN’s “X” port must connect to MDI
uplink port, and the WAN’s “II” port must connect to MDII
regular port.
3. If the WAN Port’s Link indicator does not light up then
replace the RJ-45 cable that plugged onto WAN’s “X” port
to the “II” port or from the “II” port to the “X” port at the rear
or using a crossover cable to connect on the WAN port to
meet the specification need of the xDSL or Cable modem.
4. While the LAN is link up to the computer system, the LAN
port’s Link/ACT LED will light up.
10