Gigafast EE101-AEX, Руководство пользователя

Страница: 62 / 63

PCMCIA Fast Ethernet card user’s manual
56
Appendix B
Enabler program error messages
CARDGO.EXE
Here is the list of error messages the CARDGO.EXE may display.
Error Message Solution
[Error 1]
“ The PCMCIA controller is
not present or recognized” There is no PCMCIA con-
troller on your computer.
Install a PCMCIA controller
from another computer.
[Error 2]
“ There is no card in the
PCMCIA slot. Insert the
card.” Ensure that the PC card is
correctly inserted into the
PCMCIA slot.
[Error 3]
“ The card in PCMCIA slot is
not 10/100 Ethernet Card.
Insert it” Ensure that the PC Card in
the notebook’ s PCMCIA
slot is the Ethernet Card
and that it is correctly in-
serted.
[Error 4]
“ The I/O ports do not re-
spond. Change to another
one” Change to another I/O port
using /IO=xxx. Refer to
“ Manual Installation” in
Chapter 4.
[Error 5]
“ The I/O ports specified are
invalid. Change to another
one” Valid I/O addresses are
240, 280, 300, 320, 340,
and 360.
[Error 6]
“ The IRQ specified is inva-
lid. Change to another one” Valid IRQ values are 3, 4,
5, 9, 10, and 11.