Gigafast EE101-AEX, Руководство пользователя

Страница: 43 / 63

PCMCIA Fast Ethernet card user’s manual
37
Quick installation
This section gives a brief overview of the installation process.
1. Card and Socket Services software should be bundled with
your computer; if it is not, contact your dealer. It is re-
commended that you use this software when installing your
Ethernet Card.
A system with Card and Socket Services installed allows the
PCMCIA card to automatically configure itself. While the
system is on, available system resources and insertion or
removal of the card will automatically be detected.
2. Run the INSTALL.EXE program found on your driver disc.
The install program guides you through the installation
process and will install the network drivers needed to run the
card on your network operating system.
If you successfully completed the installation, go to step 5.
If installation was unsuccessful, then go to the next step.
3. If you are using Card and Socket Services, select auto-
configuration. The install program will prompt Card and
Socket Services to assign an available hardware resource
configuration.
4. If you do not have Card and Socket Services or if your card
does not work with your version of Card and Socket Serv-
ices, the enabler program can communicate directly with the
PCMCIA controller on your system. However, you must
select hardware resource settings that are not being used by
other devices; otherwise, your PC system may have device
conflicts.