Gigafast EE100-AXP, Руководство пользователя

Страница: 22 / 29

The values 0x0000, 0x024C are JEDEC ID and can be read by typing
"cardctl ident" on console with one card on socket.
4. Edit linuxconf
th0"
Aft
->Type "linuxconf" and choose "Config"-->"Networking"-->"Client tasks"-->"Basic host
information". Select an adapter; enable it, and type "realtek_cb" on "Kernel module" and "e
(or eth1, eth2) on "Net device". Click on
"Accept" button and "Act/change" button.
5. Restart the computer.
6. More information about kernel compile: http://metalab.unc.edu/mdw/HOWTO/Kernel-
HOWTO.html more information about install: man pcmcia
ermath:
Once you have successfully installed the EE-100axp NIC you can now try to browse the internet
by
odem). Some people might have trouble connecting to the internet right after the installation
efresh on the user’s
ome of the most commonly asked
uestions. Please take advantage of our guide and if you need further assistance, please
contact our tech support line or write us an e-mail regard the problem.
Tec
Tha
having an Ethernet cable connected to the NIC (computer) to your internet service provider
(m
of the card. That is because the computer requires a reboot or the user might need to
disconnect the power off the modem for few minutes so the ISP can do a r
account. Again, the FAQ guide (
Chapter 3 ) explains s
q
hnical Support E-Mail: techsupp@gigafast.com
nk you for choosing GigaFast
22