Gigabyte W468N, Руководство пользователя

Страница: 42 / 55

32
ENGLISH
The BIOS Setup Program
6
32
Set HDD User Password / Set HDD Master Password
Enter this field always shows the message.
While this field is highlighted, press [Enter]. The following message
is shown:
Set HDD Master Password
Enter New Password [ ]
Confirm New Password [ ]
If there is an old password then setup will prompt with the following
window instead and a current password will be required to be
entered at first:
Set HDD Master Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
User can type password in field of Enter New Password , and re-
enter password in field of Confirm New Password for verification.
If verification OK:
Setup Notice
Changes have been saved.
[Continue]
The HDD supervisor password is set complete after user press
[Enter].
If verification fails:
Setup Warning
Passwords do not match.
Re-enter password. password. assword.
[Continue]
If password on boot is required, the password must be set
otherwise it cannot be enabled.
The formats of the password are as follows:
Length:
No more than 8 characters.
Characters: Alphanumeric keys only. The shift status, Ctrl, Shift,
Alt, and Capital, are ignored.
Trusted Platform Support (*)
This item will show up if Trusted Platform Module (TPM) exists in
the system.
Disabled : Disables TPM support.
Enabled: Enables TPM support.