manualshive.com logo in svg

Gigabyte W332-Z00, Руководство пользователя

Поделиться
Скачать
Gigabyte W332-Z00 Скачать руководство пользователя страница 24

- 24 -

System Hardware Installation

3-3  Installing the Memory

3-3-1 

Dual Channel Memory Configuration

This motherboard provides 4 DDR4 memory slots and supports Dual Channel Technology. After the memory 

is installed, the BIOS will automatically detect the specifications and capacity of the memory. 

Read the following guidelines before you begin to install the memory:
•  Make sure that the motherboard supports the memory. It is recommended that memory of the 

same capacity, brand, speed, and chips be used.

•  Always turn off the computer and unplug the power cord from the power outlet before installing 

the memory to prevent hardware damage.

•  Memory modules have a foolproof design. A memory module can be installed in only one 

direction. If you are unable to insert the memory, switch the direction.

CPU

DIMM_P0_A0
DIMM_P0_A1
DIMM_P0_B0
DIMM_P0_B1

Содержание W332-Z00




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды