Gigabyte T1028X Скачать руководство пользователя страница 1

Страница: 1 / 54

T1028 TouchNote User's Manual

Original Issue: 2009/08

This manual guides you through setting up and using your new Netbook PC. Information in the manual has been carefully checked for

accuracy and is subject to change without prior notice.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mecha-

nical, by photocopy, recording, or otherwise, without prior written consent.

Trademarks

Product names used herein are for identi

cation purposes only and may be the trademarks of their respective companies.

Microsoft

, MS-DOS, Windows

, and Windows

Sound System are trademarks of Microsoft Corporation.

Intel

, Atom™ is registered trademarks of Intel Corporation.

Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.

All other brands or product names mentioned in this manual are trademarks or registered trademarks of their respective companies.

Содержание T1028X























































Результаты поиска

Содержание T1028X

Отзывы:

Gigabyte T1028X, Руководство пользователя, Страница: 1 / 54

Результаты поиска

Содержание T1028X

Отзывы: