Serial ATA RAID Quick User’s Guide
33
“Create”. Then a warning message will be popup. The message is
similar to JBOD array creation.
6. Next, the restart message will be popup.
NOTE:
The RAID0+1 array support at least four hard disks.
5)
Click the tab “Delete Raid”, you can find some panes and two
buttons. The RaidType meaning will show below.
Viewing the RaidType meaning
General case: RAID0 (A = B C | D E)
<Meaning>
RAID0: Raid Type
A: total number of disks in this Raid
B,C: the serial number of each disk in this Raid
D,E: a) Raid is correct, B=D C=E
b) Raid is error, D or E will show “?” or “!”.
In which, the meaning of “?” and “!” will show below.
