Serial ATA RAID Quick User’s Guide
32
<Note>
Source: The first selected disk.
Target: The second selected disk.
Create Only: This operation will destroy all data on all the selected
disks and create a clean mirror array without any data
on it.
Create and Duplicate: Duplicate operation will reserve data on the
source disk and copy them onto the target
disk.
Ok: Start the operation.
Cancel: Cancel the operation.
<Disk Copy Remaining Sector>: Show the remaining copying data.
5. Next, you can click “Cancel” button to leave or click “Ok” button to
continue after the operation being selected. The warning messages
will be popup following the differential operations and the message
is similar to JBOD array creation.
6. When the operation is finished, the restart warning message will be
popup as well as JBOD array creation.
d) To create a RAID 0+1 (StripeMirror) array, follow these steps:
1. “Configuration”
→
“Create Raid”
→
“Raid Type”
→
RAID 0+1.
2. From the drop-down box “Block Size”, select the block size you want.
3. From the drop-down box “Mode Type”, select the mode type you
want.
4. From the “Available Disks” pane, select the disk and click downward
arrow icon or double click it to add the disk on the “Selected Disks”
pane. Please see the “Performance hints and recommend setting”
section for best settings.
5. When the RAID0+1 array’s configuration is finished, click the button
