Gigabyte S472-Z30, Руководство пользователя

Страница: 94 / 138

- 94 -
BIOS Setup
5-3-3-1-1 DRAM Controller Configuration
Parameter Description
DRAM Controller Configuration
DRAM Power Options
Press [Enter] to configure DRAM Power Options.
Š
Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is Auto .
Š
Power Down Entry Delay
– Specifies the value.
Š
SubUrgRefLowerBound
– Specifies the value. Valid value: 6~1.
Š
UrgRefLimit
– Specifies the value. Valid value: 6~1.
Š
DRAM Maximum Activate Count
– Options available: Untested MAC, 700K, 600K, 500K, 400K, 300K,
200K, Unlimited MAC, Auto. Default setting is Auto .
Š
DRAM Refresh Rate
– Options available: 7.8 usec, 3.9 usec. Default setting is Auto .
Š
Self-Refresh Exit Staggering
– Options available: Disabled, Trfc/3, Trfc/4. Default setting is
Disabled .
Cmd2T
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is
Auto .
Gear Down Mode
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is
Auto .