Gigabyte S252-ZC0 Скачать руководство пользователя страница 31

Страница: 31 / 134

- 31 -

System Hardware Installation

3-7 Installing the Hard Disk Drive

Read the following guidelines before you begin to install the Hard disk drive:
• Take note of the drive tray orientation before sliding it out.

• The tray will not fit back into the bay if inserted incorrectly.

• Make sure that the HDD is connected to the HDD connector on the backplane.

Follow these instructions to install a 3.5" hard disk drive:

1.  Loosen the thumbscrew securing the left/right side chassis cover.
2.  Open the left/right side cover.
3.  Press the release button on the HDD tray.

4. Extend the locking lever.

5. Pull the locking lever in the direction indicated to remove the HDD tray.

6. Align the hard disk drive with the positioning stud on the HDD tray.

7. Slide the hard disk drive into the HDD tray.

8. Reinsert the HDD tray into the slot and close the locking lever.

Содержание S252-ZC0







































































































































Результаты поиска

Содержание S252-ZC0

Отзывы:

Gigabyte S252-ZC0, Руководство пользователя, Страница: 31 / 134

Результаты поиска

Содержание S252-ZC0

Отзывы: