- 82 -
BIOS Setup
Parameter
Description
NIC Configuration
Press [Enter] to configure advanced items.
Link Speed
– Allows for automatic link speed adjustment.
– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full,
100 Mbps Half, 100 Mbps Full. Default setting is
Auto Negotiated
.
Wake On LAN
–
Enables power on of the system via LAN. Note that configuring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled, Disabled. Default setting is
Enabled
.
Blink LEDs
Identifies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values (up to 15 seconds).
UEFI Driver
Displays the technical specifications for the Network Interface Controller.
Adapter PBA
Displays the technical specifications for the Network Interface Controller.
Device Name
Displays the technical specifications for the Network Interface Controller.
Chip Type
Displays the technical specifications for the Network Interface Controller.
PCI Device ID
Displays the technical specifications for the Network Interface Controller.
PCI Address
Displays the technical specifications for the Network Interface Controller.
Link Status
Displays the technical specifications for the Network Interface Controller.
MAC Address
Displays the technical specifications for the Network Interface Controller.
Virtual MAC Address
Displays the technical specifications for the Network Interface Controller.
Содержание R283-S91-AAE1
