manualshive.com logo in svg

Gigabyte R281-T91, Руководство по обслуживанию, Страница: 68 / 68

Поделиться
Скачать
Gigabyte R281-T91 Скачать руководство пользователя страница 68

BIOS Setup

- 68 -

5-7-4 

BMC Network Configuration

Parameter

Description

BMC network configuration

Select NCSI and Dedicated 
LAN

Switch NCSI and dedicated LAN and send KCS command.
Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3 
(Failover).
Default setting is 

Mode1 (Dedicated)

.

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically 

(DHCP). Do nothing option will not modify any BMC network parameters 
during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting 

is 

DynamicBmcDhcp

.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 
192.168.000.001.

Router IP address

Displays the Router IP Address information. 

Station MAC address

Displays the MAC Address information. 

Real-time synchronize BMC 
network parameter values

Press [Enter] to synchronize the BMC network parameter values.

Содержание R281-T91





































































Отзывы:

Нет отзывов