Gigabyte R281-T91 Скачать руководство пользователя страница 2

Страница: 2 / 68

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or pub-

lished in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:



For detailed product information, carefully read the User's Manual.

For More Information

For related product specifications, the latest firmware and software, and related information, please visit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter

Email:

[email protected]

Facebook:

https://www.facebook.com/gigabyteserver

Twitter:

https://twitter.com/GIGABYTEServer

Содержание R281-T91





































































Результаты поиска

Содержание R281-T91

Отзывы:

Gigabyte R281-T91, Руководство по обслуживанию, Страница: 2 / 68

Результаты поиска

Содержание R281-T91

Отзывы: