manualshive.com logo in svg

Gigabyte R262-ZA1, Руководство пользователя, Страница: 76 / 149

Поделиться
Скачать
Gigabyte R262-ZA1 Скачать руководство пользователя страница 76

BIOS Setup

- 76 -

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

SLOT#_Lanes Configuration

(Note1)

Change the PCIe lanes.
Options available: Disabled, Auto, x8, x4x4, x16, x8x8, x8x4x4, 
x4x4x8, x4x4x4x4. Default setting is 

Auto

.

SLOT #_I/O ROM

(Note1)

When enabled, this setting will initialize the device expansion ROM 
for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

SLOT #_Max Link Speed

(Note1)

Configure PCIe max link speed.

Options available: Auto, Maximum, Gen1, Gen2, Gen3, Gen4. 
Default setting is 

Auto

.

OCP#

 

Lanes

(Note2)

Change mezzanine PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4,
Disabled. Default setting is 

Auto

.

OCP#

  

I/O ROM

(Note2)

When enabled, this setting will initialize the device expansion ROM 
for the related devices.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

OCP# Max Link Speed

(Note2)

Configure mezzanine OCP max link speed.

Options available: Auto, Maximum, Gen1, Gen2, Gen3, Gen4. 
Default setting is 

Auto

.

Onboard LAN Controller

(Note3)

Enable/Disable the onboard LAN devices.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Onboard LAN# I/O ROM

(Note3) 

Enable/Disable the onboard LAN devices, and initializes device 
expansion ROM.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

Above 4G Decoding

Enable/Disable memory mapped I/O to 4GB or greater address 
space (Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is 

Enabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support. 
Options available: Enabled, Disabled. Default setting is 

Enabled

.

(Note1)   This section is dependent on the available PCIe Slot.
(Note2)   This section is dependent on the available OCP connector.
(Note3)   This section is dependent on the available LAN controller.

Содержание R262-ZA1






















































































































































Отзывы:

Нет отзывов