Gigabyte R161-R12, Руководство по обслуживанию

Страница: 82 / 123

BIOS Setup - 82 -
Parameter Description
CLR/Ring
(Note)
Press [Enter] to configure advanced items.
Š
CLR Max OC Ratio
– Sets the maximum OC Ratio for the CLR Domain.
Š
CLR Min Ratio
– Sets the minimum ratio for the CLR Domain.
Š
CLR Voltage Mode
– In Override mode, the voltage selected will be applied over all
operating frequencies.
– In Adaptive mode, the voltage is interpolated only in turbo mode.
– Options available: Adaptive/Override. Default setting is Adaptive .
Š
CLR Extra Turbo Voltage
– Specifies the extra turbo voltage applied while GT is operating in
millivolts. Range 0-2000 mV.
Š
CLR Voltage Offset
– Specifies the Offset voltage applied to GT domain. This voltage is
specified in millivolts. Range -1000 to 1000 mV.
Š
Offset Prefix
– Sets the offset value as positive or negative.
Uncore
(Note)
Press [Enter] to configure advanced items.
Š
Uncore Voltage Offset
– Specifies the Offset voltage applied to the Uncore domain. This
voltage is specified in millivolts. Range -1000 to 1000 mV.
Š
Offset Prefix
– Sets the offset value as positive or negative.
SVID/FIVR (Note)
Press [Enter] to configure advanced items.
Š
VCCIN
– Enable/Disable VCCIN through external VR.
– Options available: Enable/Disable. Default setting is Disable .
Š
FIVR Faults
– Enable/Disable FIVR faults. When this function are disabled,
OVP and OCP protection mechanisms will be masked. This is a
dangerous configuration and the risk of using it is assumed by the
user.
– Options available: Enable/Disable. Default setting is Enable .
Š
FIVR Efficiency Management
– FIVR efficiency management is good for power delivery efficiency,
but it may be an impediment to proper power delivery control
under overclocking, particularly BCLK overclocking.
– Options available: Enable/Disable. Default setting is Enable .
TJ-Max offset
(Note) Changes the TJ-Max offset (125°C - fuse value).
(Note) This item appears when OverClocking Feature is set to Enabled .