background image

BIOS Setup

- 74 -

Parameter

Description

CPU C State Control

Press [Enter] to configure advanced items.

 

Š

Autonomous Core C-State

 

– Enable/Disable the Autonomous Core C-State Control.

 

– Options available: Enable/Disable. Default setting is 

Disable

.

 

Š

CPU C6 Report

 

– Allows you to determine whether to let the CPU enter C6 mode 

in system halt state. When enabled, the CPU core frequency 
and voltage will be reduced during system halt state to decrease 
power consumption. The C6 state is a more enhanced power-
saving state than C1.

 

– Options available: Disable/Enable/Auto. Default setting is 

Auto

.

 

Š

Enhanced Halt State (C1E)

(Note)

 

– Core C1E auto promotion control. Takes effect after reboot.

 

– Options available: Enable/Disable. Default setting is 

Enable

.

Package C State Control

Configures the state for the C-State package limit.

Options available: C0/C1 state, C2 state, C6(non Retention) state, 
C6(Retention) state, No Limit, Auto.
Default setting is 

Auto

.

(Note)  Advanced items prompt when this item is defined.

Содержание R161-R12




























































































































Отзывы: