Gigabyte p37, Руководство пользователя

Страница: 13 / 19

English
13
English
12
Setup Your System for RAID 0/1
WARNING
●
Please backup your data before you build and run RAID 0/1 on your system.
●
RAID 1 needs two storage drives of the same specification and capacity in your laptop.
●
RAID 0 needs two storage drives of the same specification in your laptop. Different capacity is
acceptable.
1
• Please install the HDDs/SSDs you would
like to build your RAID 0 configuration in
the system, then turn on the system.
2
• Press F2 right after turning on and enter
the BIOS.
3
• Press right click and enter [Advanced]
menu and choose [Intel Rapid Storage
Technology]
4
• Select [Create RAID Volume]
5
• Select the HDD/SSDs you would like to
build RAID 0 with [X]. In this example,
the RAID 0 is composed with 2 SSD.
After the selection, choose Create
Volume
6
• The Creation of RAID 0 is finished now
and please remember to save it in Save
& Exit page and reboot the system. Then
you can start to install the OS in your
new disk volume