13. To enable the software control function, connect the USB
connector from the power supply to Motherboard. If there
is no USB connector on the motherboard, please use the
USB converter to connect to the rear of the motherboard
or an add-on card with a USB I/O port. (Odin GT series
only)
To connect the USB connector to the rear I/O USB port,
please use the converter, which is included in the package,
and connect the converter to the rear USB port by passing the
rear slot. (Odin GT series only)
14. After installation, connect the power cord to the Odin GT
power supply unit. Now you are ready to experience the
performance of the Odin series power supply. (Odin GT
series only)
En
glis
h
17