Gigabyte MJ11-EC0, Руководство пользователя, Страница: 50 / 109

BIOS Setup - 50 -
Parameter Description
Memory interleaving
Controls the fabric level memory interleaving. Note that channel, die, and
socket has requirements on memory populations and it will be ignored if the
memory doesn't support the selected option.
Options available: Auto, None, Channel, Die Socket. Default setting is
Auto .
Memory interleaving size
Controls the memory interleaving size. This determines the starting address
of the interleave (bit 8, 9, 10 or 11).
Options available: Auto, 256Bytes, 512Bytes, 1KB, 2KB. Default setting is
Auto .
Channel interleaving hash
Controls whether or not the address bits are hashed during channel
interleave mode. This field should not be used unless the interleaving is set
to channel and the interleaving size is 256 or 512 bytes.
Options available: Auto, Enabled, Disabled. Default setting is
Auto .
Memory Clear
Enable/Disable the Memory Clear feature. When this feature is disabled,
BIOS does not implement MemClear after memory training (only if non-
ECC DIMMs are used).
Options available: Auto, Enabled, Disabled. Default setting is
Auto .
1TB remap
Enable/Disable to remap DRAM out of the space just below the 1TB
boundary. The ability to remap depends on DRAM configuration, NPS, and
interleaving selection, and may not always be possible.
Options available: Auto, Do not remap, Attempt to remap.
Default setting is
Auto .
ACPI SRAT below 1MB
reporting mode
Controls whether or not 0xA0000 - 1MB is reported as DRAM in the SRAT.
Options available: Auto, Do not report, Report as DRAM.
Default setting is
Auto .