Gigabyte H252-Z12 Скачать руководство пользователя

Страница: 81 / 116

- 79 -

BIOS Setup

Parameter

Description

RedirectForReturnDis

From a workaroud for GCC/C000005 issue for XV Core on CZ A0,
setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14

[DecfgNoRdrctForReturns] to 1.

Options available: Auto/1/0. Default option is

Auto

Platform First Error Warning

Enable/Disable PFEH, cloak individual banks, and mask deferred error

interrupts from each bank.

Options available: Enabled/Disabled/Auto. Default option is

Enabled

Core Performance Boost

Allows you to disable CPB.

Options available: Disabled/Auto. Default option is

Auto

Global C-State Control

Controls the IO based C-state generation and DF C-states.

Options available: Disabled/Enabled/Auto. Default option is

Auto

Power Supply Idle Control

Configures the power supply idle control.
Options available: Low Current Idle/Typical current Idle/Auto. Default

option is

Auto

Opcache Control

Enables or disables the Opcache.

Options available: Disabled/Enabled/Auto. Default option is

Auto

SEV ASID Count

This field specifies the max. valid ASID, which affects the maximum

system physical address space. 16TB of physical address space is
available for systems that support 253 ASIDs, while 8TB of physical
address space is available for systems that support 509 ASIDs.

Options available: 253 ASIDs/509 ASIDs/Auto. Default option is

Auto

SEV-ES ASID Space Limit
Control

Space limit control for SEV-ES ASIDs.

Options available: Auto/Manual. Default option is

Auto

Streaming Stores Control

Enables or disables the streaming stores functionality.

Options available: Disabled/Enabled/Auto. Default option is

Auto

Local APIC Mode

Sets the Local APIC mode.

Options available: xAPIC/x2APIC/Auto. Default option is

Auto

ACPI_CST C1 Decaration

Determines whether or not to declare the C1 state to the OS.

Options available: Disabled/Enabled/Auto. Default option is

Auto

MCA error thresh enable

Enable MCA error thresholding.

Options available: False/True/Auto. Default option is

Auto

SMU and PSP Debug Mode

When this option is enabled, specific uncorrected errors detected by the

PSP FW or SMU FW will hand and not reset the system.

Options available: Disabled/Enabled/Auto. Default option is

Auto

Содержание H252-Z12





















































































































Результаты поиска

Содержание H252-Z12

Отзывы:

Похожие инструкции для H252-Z12

Бренды по названию

Популярные бренды

Gigabyte H252-Z12, Руководство пользователя

Результаты поиска

Содержание H252-Z12

Отзывы:

Похожие инструкции для H252-Z12

Бренды по названию

Популярные бренды