manualshive.com logo in svg

Gigabyte H252-3C0, Руководство пользователя, Страница: 94 / 117

Поделиться
Скачать
Gigabyte H252-3C0 Скачать руководство пользователя страница 94

- 94 -

BIOS Setup

5-3-11  Power Policy

Parameter

Description

Power Policy Quick Settings

Selects a Power Policy Quick Setting.

Options available: Standard, Best Performance, Energy Efficient, Turbo 

Lock. Default setting is 

Best Performance

.

SpeedStep (Pstates)

Conventional Intel SpeedStep Technology switches both voltage and 
frequency in tandem between high and low levels in response to processor 
load.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Turbo Mode

When this item is enabled, the processor will automatically ramp up the 
clock speed of 1-2 of its processing cores to improve its performance. 
When this item is disabled, the processor will not overclock any of its core.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

CPU C6 report

Allows you to determine whether to let the CPU enter C6 mode in system 
halt state. When enabled, the CPU core frequency and voltage will be 
reduced during system halt state to decrease power consumption. The C6 
state is a more enhanced powersaving state than C1.
Options available: Disabled, Enabled, Auto. Default setting is 

Disabled

.

Enhanced Halt State (C1E)

Core C1E auto promotion control. Takes effect after reboot.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

Содержание H252-3C0






















































































































Отзывы:

Нет отзывов