Gigabyte GV-R545-1GI, Руководство пользователя

Страница: 4 / 32

- 4 - AMD Series Graphics Accelerator
2.1. Hardware Installation
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the
metal cover from this slot; then align your graphics card with
the PCI Express x16 slot, and press it in firmly until the card is
fully seated.
Step 2.
Replace the screw to fasten the card in place, and replace the
computer cover.
Make sure that the gold edge connector of the graphics card is securely
inserted.
Step 3.
Plug the display cable into your card; then turn on the computer and monitor. To connect a flat panel
display to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics
card, use the HDMI connector. To connect a DisplayPort monitor to your graphics card, use the
DisplayPort connector.
You are now ready to proceed with the installation of the graphics card driver. Please refer to next
chapter for detailed instructions.
After installation, remember to connect the power cable to your graphics
card, or the system will not boot. Do not touch the card when it's operating
to prevent system instability.
To Flat Panel Display To HDMI Monitor
DisplayPort Monitor To Mini DisplayPort Monitor To D-Sub Monitor
To Mini HDMI Monitor To Flat Panel Display